Inhalation Toxicity Testing: Expert Meeting on Potential Revisions to OECD Test Guidelines and Guidance Document

Publication Date : 2012
Code : 104
1,129 Visited Entry Date : 2017/10/02

International

English
Volume 35 Pages
Document type Event Report
Subject Characterization & Testing
Summary

The expert meeting on Inhalation Toxicity Testing for Nanomaterials was held on 19-20 October 2011 in The Hague, hosted by the Netherlands, with the aim of discussing the results of the OECD Sponsorship Programme (under the responsibility of SG3) on this specific topic and addressing issues relevant to inhalation toxicity. Fifty experts from the WPMN as well as the OECD Working Group of the National Coordinators for the Test Guidelines programme (WNT) participated in the meeting. This document is the meeting report.

This document includes summaries and recommendations from each of the presentations (Annex II) as well as suggested revisions to the OECD Test Guidelines (TGs 403, TG412, TG413 and TG436), the Guidance Document on Acute Inhalation Toxicity Testing and the Preliminary Guidance Notes on Sample Preparation and Dosimetry for the Safety Testing of Manufactured Nanomaterials. It also includes the meeting agenda (Annex I), and the Participants list (Annex III).
Content

ABOUT THE OECD

 

FOREWORD

 

OECD’S PROGRAMME ON THE SAFETY OF MANUFACTURED NANOMATERIALS

 

EXECUTIVE SUMMARY

 

REPORT OF THE WPMN EXPERT MEETING ON INHALATION TOXICITY TESTING FOR NANOMATERIALS

   Summary    

   Objectives of the Workshop    

   Recommendations raised by the speakers for the discussion    

   Discussions among all participants    

 

ANNEX I: MEETING AGENDA

 

ANNEX II: SUMMARY OF PRESENTATIONS

   Session 1 - General Presentations: Setting the Scene    

   Session 2 - Contributions by inhalation experts from the OECD Sponsorship Programme    

   Session 3 - Studies on Inhalation Toxicity    

 

ANNEX III: PARTICIPANTS LIST

 

ANNEX IV: SUGGESTED REVISION FOR THE OECD TEST GUIDELINES AND GUIDANCE DOCUMENTS

   Suggested revision for OECD Test Guidelines and Guidance Documents Drafted by Hans Muijser (TNO Triskelion bv) and Flemming R. Cassee (RIVM)    

      A. TG 403/412/413/436 on Inhalation Toxicity in light of the use for testing nanomaterials         

      B. ENV/JM/MONO(2009)28 Guidance Document on Acute Inhalation Toxicity Testing         

      C. ENV/JM/MONO(2010)25 Preliminary Guidance Notes on Sample Preparation and Dosimetry for the Safety Testing of Manufactured Nanomaterials          
Organization
  • Organisation for Economic Co-operation and Development Published by
  • Inter-Organisation Programme for the Sound Management of Chemicals Supported by
Related Document

Event Report (2006)

Report of the OECD Workshop on the Safety of Manufactured Nanomaterials: Building...

Entered in 2013/05/16 1113 Visited

Event Report (2009)

Report of an OECD Workshop on Exposure Assessment and Exposure Mitigation: Manufactured...

Entered in 2017/09/10 2535 Visited

Event Report (2010)

Report of the Workshop on Risk Assessment of Manufactured Nanomaterials in a Regulatory...

Entered in 2017/10/02 1107 Visited

Event Report (2007)

Regulation of Nanotechnology in Consumer Products

Entered in 2017/10/04 1117 Visited

Event Report (2012)

Workshop on Nanomaterials

Entered in 2017/10/04 1095 Visited

Event Report (2013)

Pragmatic steps towards a more effective EU nano policy

Entered in 2014/04/10 1022 Visited

Event Report (2007)

Nanoparticle Occupational Safety and Health (NOSH) Consortium

Entered in 2015/03/09 1032 Visited

Event Report (2006)

Report of the OECD Workshop on the Safety of Manufactured Nanomaterials: Building...

Entered in 2017/09/10 1250 Visited

Event Report (2005)

Nanosciences and nanotechnologies: An action plan for Europe 2005-2009

Entered in 2016/12/03 1153 Visited

Event Report (2004)

NANOTECHNOLOGIES: A PRELIMINARY RISK ANALYSIS ON THE BASIS OF A WORKSHOP ORGANIZED IN...

Entered in 2016/12/06 1040 Visited
more